OVERFILL STEEL BIN

OVERFILL STEEL BIN

Issue

Wasting time clearing off top of steel bin – its time waste and dangerous

Wasting time moving crate before scrap guy comes in

If steel bin has space tip into bin
How bin should be filled up to (not overflowing)


What to do when bin is full

ITS DISMANTLERS RESPONSIBILITY TO EMPTY OWN BIN

Don’t over fill bin IF STEEL BIN IS FULL, GET EMPTY SCRAP CRATE. (BIG ITEMS DONT TIP SMALL BIN ON CRATE ) If too scrap crate to full – put steel in scrap crate , leave small scrap item in your steel bin ( if you put small things in empty crate they will go everywhere )



Scrap crates should look like this and put that scrap crate on eastern back end (like in photo)



If no room ask Operations Manager.




    • Related Articles

    • STEEL/ALLOYS BINS - UPDATED FEB 2016- guide re arranging pick up

      ***NOTE: DOCUMENT WILL ONLY BE UPDATED ONCE IN 3 MONTHS FOR XERO RECONCILIATION: Download the PDF from from the ONE STEEL notification ticket Go to Xero and look for the ONE STEEL entry  Under the CREATE tab, click on ADD DETAILS and it will show you ...

    • WHEEL STANDARD/STEEL -INTERCHANGE GUIDELINES

      Abbreviations Used  IN - for inches ,its the diameter fo the wheel IC Line Layout SIZE INCHES MODEL DESCRIPTION YEAR RANGE   Notes as regards this particular part Wheel Mag refers to a wheel on a car that is alloy Wheel standard steel refers to a ...

    • BINS - GUIDE RE TASK OF EMPTYING TIP BINS- Updated May 2022

      LINK TO GUIDE

    • CHECKING ONE STEEL INVOICE-( sale of scrap/car bodies/alloy)

      Checking ONE STEEL invoice – step 1 Go toONE STEEL folder   ·          Click One Steel email       ·         Open attached Pdf invoice      ·         Check for the Product ·         If the product is CAR BODIES(like the image above) ·         check  ...

    • ONE STEEL ENTER IN XERO and RECONCILE

      ONE STEEL ENTER IN XERO and RECONCILE :     Ø  Go to XERO / DASHBOARD / CHEQUE ACCOUNT click RECONCILE Ø  Find “ONE STEEL” Ø  Check the amount from RECONCILE and from the total amount of REMITTANCE, if same click “OK’ to reconcile. (make sure that ...